$450.00 $339.95

Mercury 104mm 1600KV-CCW (8~9S Li-Po)



FREE SHIPPING for Orders over $199.95

This Mercury 104mm Metal EDF unit is a cutting edge of EDF design. All Mercury 104mm Metal EDF parts are manufactured with precision CNC machine tools to maintain strict tolerances while enables a high level of accuracy in the manufacturing process.

This EDF is milled from aircraft grade high tensile Aluminum alloy to improve performance and also to help reduce deformity of the duct during installation. Moreover, the aluminum alloy structure acts as a heat sink for improved heat dissipation. There are 11 fan blades together with the motor are also milled from high tensile aluminum alloy as a single assembly. In addition, the fan-motor assembly has a cooling fan incorporated into it, as well as dynamically balanced at the factory, which means a time saver and less frustration for modeler from not having to spend hours balancing the fan unit and the motor.

This EDF unit has been tested in the wind-tunnel using Computer Aided Evaluation and found to reduce high speed deformation by 90%, as compared to a conventional ABS or plastic fan. The Mercury 104mm Metal EDF incorporates an innovative 3-bearing system to reduce resonance vibration by 90%. This vibration is common to all EDF design, which is caused by both the fan and motor vibration, which causes the blade tips to rub against the shroud of the duct.

1. The first EDF with Motor Shaft Cooling / Turbo Inner-cooling System in the world.
2. The Turbo Inner-cooling System allows motor to cool down to room temperature within 15~20 seconds at half throttle.
3. 60,000 RPM High Speed Dynamic Motor and Fan balance adjustment.
4. High Precision CNC Cutting for the Rotor and Fan.
5. The 11 fan blade is the first in the world to use high tensile aluminum alloy.
6. Fully supported motor shaft with 3 end to end bearings.
7. Replaceable motor core without disrupting the precision balanced motor can and fan assembly.
8. All Alloy Design
9. Optimized Air Flow.

Flight Tip: Set the ESC timing to LOW or 2 degree setting. As with any type of electric motor, apply the 80% rule for best experience.

The following are factory's specification measured in static setup. Actual values may be vary in individual setup and flght mode:

Motor: 1600kv 40mm High Performance EDF Brushless Outrunner Motor
EDF Unit: 104mm
Battery: 29.6v (8s Max)
AMP Draw: 102 amp (Max)
Watts: 3019 watts (Max)
Thrust: 5.4kg (Max), 4.6kg (continuous)
ESC: 120-125A
Unit Weight: 495g

Quick Find
Use keywords to find the product you are looking for.
Advanced Search
0 items
Manufacturer Info
EPF Hobby
Other products
Share Product
Additional Options
Web hosting services by SiteGround